Home      FL 282

FL 282
Click on the picture for the wav sound.


    Primary Function:
    Rotor Diameter:
    Weight Empty:
    Max. Weight:
    Cruise Speed:
    Max. Speed:
    Climb Rate:
    First Flight:
    Year Deployed:
840 lbs.
Bramo radial
160 h.p.
21' 6"
7' 3"
39' 3"
1,670 lbs.
2,200 lbs.
80 mph
93 mph
350 fpm
10,800 feet
185 miles

The FL 282 was designed by Anton Flettner. It was nicknamed the Kolibri (hummingbird).

Flettner was working for years to produce a practical helicopter. His
answer to controlling the torque produced by the helicopter's main rotor was the use of a pair of twin bladed rotors rotating in opposite directions. There was no need for an anti-torque tail rotor. After Flettner demonstrated his design, the German Navy placed an initial order for the FL 282.

The FL 282 was tested from surface ships and submarines. It was highly maneuverable and during a test flight was able to out maneuver German fighter aircraft.

A seat behind the engine was added to the FL 282 for an observer. Both the Luftwaffe and Navy began flying the aircraft from shore and ships on reconnaissance, rescue, and supply missions. Some FL 282 helicopters operated from escort vessels in an anti-submarine role.

Eventually 1,000 FL 282 helicopters were ordered for production by BMW. However, few ever were produced due to Allied bombings of factories.

Reports are that the FL 282 was easy to control, although the rotors could strike the tail of the helicopter during quick maneuvering. Relatively minimal maintenance was necessary to keep the helicopters operational. One FL 282 was able to operate for a total of 95 hours before any maintenance was necessary.

The large rudder of the FL 282 was only needed to trim the aircraft and was not particularly effective due to the turbulence generated by the aircraft. Both pilot and observer of the helicopter were exposed to the elements which made flying particularly uncomfortable in inclement weather. Both crew members had a good all around view due to the central mounting of the engine.

The rotor blades of the FL 282 were wooden ribs on tubular steel spars with a fabric covering. The engine air intake was below the fuselage. A fan brought air into the engine and aided cooling. The pilot had peddles which controlled nose wheel steering as well as the rudder. Basic instruments were in a panel at the front of the cockpit.

A total of 24 FL 282 helicopters were produced. Twenty of them were deployed for anti-submarine duties in the Aegean and Mediterranean.

After the War the U.S. took possession of two completed FL 282 helicopters, and the Russians one.

Email us.